Publications

  1. Landek, B. Liščić, T. Filetin, T. Lübben: END-QUENCH HARDENABILITY TEST FOR GAS QUENCHED STEELS, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  2. D. Landek, , D. Lisjak, T. Lübben: PREDICTION OF THERMAL DISTORTIONS BY A NEWLY DEVELOPED DIMENSIONLESS MODEL, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  3. B. Liščić: GAS QUENCHING WITH CONTROLLABLE HEAT EXTRACTION, THERMEC ‘2006 – International Conference on Processing and manufacturing of Advanced Materials – Vancuver : The Minerals, Metals and Materials Society, 2006.
  4. B. Liščić, S. Singer, B. Smoljan: PREDICTION OF QUENCH-HARDNESS WITHIN THE WHOLE VOLUME OF AXIALLY-SYMMETRIC WORKPIECES OF ANY SHAPE, Journal of ASTM International, Vol.7, No.2, (Paper ID JAI102647)
  5. L. A. Dobrzański, W. Sitek: COMPUTER SIMULATION OF THE HARDENABILITY OF HEAT-TREATABLE STEELS, 1st International conference on heat treatment and surface engineering of tools and dies, IFHTSE 2005 (08 – 11 June 2005, Pula, Croatia)
  6. B. Edenhofer: NEWER DEVELPMENTS IN IMPROVING THE INTENSITY, FLEXIBILITY AND CONTROLLABILITY OF OIL QUENCH SYSTEMS IN SEALED QUENCH FURNACES, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  7. I. Felde, T. Réti, G. Sarmiento, M. Guerrero, J. Grum: COMPARISON STUDY OF NUMERICAL METHODS APPLIED FOR ESTIMATION OF HEAT TRANSFER COEFFICIENT DURING QUENCHING, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  8. I. Felde, T. Réti, J. Bodin, G. Sarmiento, B. Smoljan: A NOVEL EVALUATION METHOD OF QUENCHANTS BY USING COMPUTER SIMULATION, 1st International conference on heat treatment and surface engineering of tools and dies, IFHTSE 2005 (08 – 11 June 2005, Pula, Croatia)
  9. T. Filetin, I. Žmak, D. Lisjak, D. Novak, D. Landek: THE APPLICATION OF ARTIFICIAL INTELLIGENCE METHODS IN HEAT TREATMENT, 1st International conference on heat treatment and surface engineering of tools and dies, IFHTSE 2005 (08 – 11 June 2005, Pula, Croatia)
  10. D. Landek, B. Liščić, T. Filetin, T. Lübben, D. Lisjak: HARDENABILITY TESTING AND SIMULATION OF GAS-QUENCHED STEEL, Materials and Manufacturing Processes, (24:868–872, 2009.)
  11. T. Inoue, H. Wakamatsu: UNIFIED THEORY OF TRANSFORMATION PLASTICITY AND  THE EFFECT ON QUENCHING SIMULATION, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  12. T. Filetin, D. Majetić, I. Žmak: PREDICTION THE JOMINY CURVES BY MEANS OF NEURAL NETWORKS, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Croatia
  13. B. Liščić: POSSIBILITIES OF HEAT TRANSFER CONTROL DURING QUENCHING, Workshop on Quenching, Mangalore, 2008.
  14. B. Liščić: ASSESSMENT OF QUENCHING INTENSITY AND THE HARDENING POWER, Workshop on Quenching, Mangalore, 2008.
  15. B. Liščić: CRITICAL HEAT FLUX DENSITIES AND WETTING KINEMATICS WHEN QUENCHING IN VAPOURIZABLE LIQUIDS, Workshop on Quenching, Mangalore, 2008.
  16. B. Liščić: INTENSIVE QUENCHING TECHNOLOGY, Workshop on Quenching, Mangalore, 2008.
  17. B. Liščić: HIGH PRESSURE GAS QUENCHING IN VACUUM FURNACES, Workshop on Quenching, Mangalore, 2008.
  18. N.I. Kobasko: THE MAIN PRINCIPLES OF INTENSIVE QUENCHING OF TOOLS AND DIES, 1st International conference on heat treatment and surface engineering of tools and dies, IFHTSE 2005 (08 – 11 June 2005, Pula, Croatia)
  19. N.I. Kobasko, L.C.F. Canale, G.E. Totten: IMPROVED PRODUCTION OF STEEL PARTS BY INTENSIVE QUENCHING, 1st International conference on heat treatment and surface engineering of tools and dies, IFHTSE 2005 (08 – 11 June 2005, Pula, Croatia)
  20. M.A. Aronov, J.A. Powell, N.I. Kobasko: IMPROVING TOOL PRODUCT PERFORMANCE THOUGH THE USE OF INTENSIVE QUENCHING PROCESSES, 1st International conference on heat treatment and surface engineering of tools and dies, IFHTSE 2005 (08 – 11 June 2005, Pula, Croatia)
  21. D. Komatsu, E.C. Souza, L.C.F. Canale, G.E. Totten : EFFECT OF CORROSION INHIBITORS ON COOLING CURVE BEHAVIOR OF SOYBEAN OIL-BASED QUENCHANTS, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  22. Lj. Pedišić, B. Matijević, B. Perić: INFLUENCE OF QUENCHING OILS COMPOSITION ON THE COOLING RATE, 1st International conference on heat treatment and surface engineering of tools and dies, IFHTSE 2005 (08 – 11 June 2005, Pula, Croatia)
  23. B. Hernández Morales, A. López Valdéz, H.J. Vergara Hernández, G. Sánchez Sarmiento, A. Gastón, G. E. Totten: EXPERIMENTAL DETERMINATION OF THE TEMPERATURE EVOLUTION WITHIN THE QUENCHANT DURING IMMERSION QUENCHING, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  24. D. Landek, F. Cajner, T. Filetin: COMPUTER SIMULATION OF INDCTION SURFACE HARDENING AXIALLY SYMMETRIC WORKPIECES, Journal de Physique IV France 120 (2004) 499-506, EDP Sciences, Les Ulis, (DOI: 10.1051/jp4:2004120057)
  25. Lj. Pedišić, B. Matijević, J. Munić: THE INFLUENCE OF QUENCHANTS COMPOSITION ON THE COOLING RATE, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  26. B. Liščić: GAS QUENCHING WITH CONTROLLABLE HEAT EXTRACTION, Thermtec’ 2006, July 4-8, 2006, Vancouver
  27. B. Liščić: SYSTEM FOR PROCESS ANALYSIS AND HARDNESS PREDICTION WHEN QUENCHING AXIALLY-SYMMETRICAL WORKPIECES OF ANY SHAPE IN LIQUID QUENCHANTS, Thermtec’2009.
  28. V. Jagannath, K.N. Prabhu: QUENCH SEVERITY AND KINETICS OF WETTING OF VEGETABLE OIL BLENDS AND NANOFLUIDS FOR HEAT TREATMENT, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  29. F. Ravnik, J. Grum: RELATION BETWEEN SOUND EMISSION OCCURRING QUENCHING AND MECHANICAL PROPERTIES OF THE STEEL AFTER QUENCHING, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  30. F. Ravnik, J. Grum: SOUND EMISSION ANALYSIS DURING THE QUENCHING OF 42CrMO4 STEEL IN VARIOUS SPECIMEN SHAPES, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  31. M. Réger, B. Verő, Zs. Csepeli, C.H. Gür: THE ROLE OF INTERCRITICAL JOMINY TEST IN THE DEVELOPMENT OF DP AND TRIP STEELS, 1st International conference on heat treatment and surface engineering of tools and dies, IFHTSE 2005 (08 – 11 June 2005, Pula, Croatia)
  32. Th. Lübben, F. Frerichs, F. Hoffmann, H.-W. Zoch: REWETTING BEHAVIOUR DURING IMMERSION QUENCHING, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  33. C. Şimşir, T. Lübben, F. Hoffmann, H.-W. Zoch, M. Wolff: PREDICTION OF DISTORTIONS IN THROUGH HARDENING OF CYLINDRICAL STEEL WORKPIECES BY DIMENSIONAL ANALYSIS, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  34. B. Smoljan: COMPUTER SIMULATION OF MICROSTRUCTURE TRANSFORMATION DURING THE QUENCHING, Faculty of Engineering, Chair of Materials Science and Engineering, Rijeka, Croatia
  35. B. Smoljan, D. Rubeša, N. Tomašić, S. Smokvina Hanza, D. Iljkić: AN APPLICATION OF MODIFIED JOMINY-TEST IN COMPUTER SIMULATION OF QUENCHING OF COLD WORK TOOL STEELS, 1st International conference on heat treatment and surface engineering of tools and dies, IFHTSE 2005 (08 – 11 June 2005, Pula, Croatia)
  36. M. Steinbacher, B. Clausen, F. Hoffmann, H.-W. Zoch: INFLUENCING PARAMETERS ON THE DISTORTION OF DISK-SHAPED GEAR WHEEL BASE BODY DERIVED FROM CARBURIZATION, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  37. Ester Carvalho de Souza, Lauralice de C.F. Canale, George E. Totten: VEGETABLE OIL STRUCTURE AND ANTIOXIDANTS, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  38. L. Markegård, H. Kristoffersen: RESIDUAL STRESS AFTER SURFACE HARDENING – AN EXPLANATION OF HOW RESIDUAL STRESS IS CREATED, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  39. E. Troell, H. Kristoffersen: INFLUENCE ON COOLING CHARACTERISTICS OF AGEING AND CONTAMINATION OF POLYMER QUENCHANTS, New challenges in heat treatment and surface engineering – conference in honour of prof. Božidar Liščić (09 – 12 June 2009, Dubrovnik – Cavtat, Croatia)
  40. T. Filetin, B. Liščić, J. Galinec: NEW COMPUTER-AIDED MTHOD FOR STEEL SELECTION BASED ON HARDENABILITY, Heat treatment of metals (1996.3 p.63-66)
  41. I.Felde, T. Reti, S. Segerberg, J. Bodin, G. E. Totten: CHARACTERIZATION OF QUENCHING PERFORMANCE BY USING COMPUTERIZED PROCEDURES AND DATA BASE OF HEAT TREATMENT PROCESSES, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  42. T. Inoue: COMPUTER MODELLING TO PREDICT HARDENABILITY OF STEELS FOR AUTOMOBILE COMPONENTS, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  43. T. Filetin, I. Žmak, D. Markučić, D. Novak: DETERMINATION OF THE PHYSICAL PROPERTIES OF HEAT TREATABLE STEELS, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  44. H. M. Tensi, G. E. Totten, G. M. Webster, M. Meindl, K. Lainer: DEVELOPMENT AND TECHNOLOGY OVERVIEW OF A FLUID FLOW SENSOR (SONDE) FOR COMMERCIAL QUENCH TANKS, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  45. P. Stolar, H. Altena, P. Jurči, F. Klima, O. Honzik: DISTORTION OF GEAR WHEELS AFTER QUENCHING IN GAS AND OIL, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  46. D. S. MacKenzie, L. Gunsalus, I. Lazerav: EFFECT OF CONTAMINATION ON THE COOLING RATE OF QUENCH OILS, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  47. G.E. Totten, H.M. Tensi, G.M. Webster: FLUID FLOW SENSORS FOR INDUSTRIAL QUENCH BATHS:  A LITERATURE REVIEW, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  48. J. Grum, S. Božič, M. Zupančič: INFLUENCE OF QUENCHING AGENTS ON DISTORTION OF MODIFIED NAVY-C RINGS MADE OF HEAT-TREATMENT STEEL 4140, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  49. G. Casalino, L. Cautero, L. A. C. De Filippis, A. D. Ludovico, D. Longo, C. Maselli: INVESTIGATION ON DEFORMATION OF GEAR FOR AUTOMOTIVE APPLICATION CAUSED BY CASE HARDENING, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  50. T. Réti, M. Réger: MODELING OF INCLOMPLETE TRANSFORMATION PROCESSES OCCURRING IN STEELS, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  51. P. F. Stratton: MODELLING THE GAS QUENCHING OF A CARBURISED GEAR, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  52. N. I. Kobasko: OPTIMAL QUENCHED LAYER AT THE SURFACE OF STEEL PARTS, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  53. P. Danev, R. Radeva: PC INTEGRATED INSTALLATION FOR STUDYING OF THE COOLING ABILITY OF FLUIDS FOR HARDENING AT LOWERED PRESSURE (VACUUM), Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  54. F. Salawa: QUENCHING FLUIDS – APPLICATIONS AND FUTURE DEVELOPMENT, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  55. E. Reiss, K. Arimoto, W. T. Wu: RECENT DEVELOPMENT IN HEAT TREATMENT SIMULATION DEFORM™-HT, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  56. D. Y. Ju, R. Mukai: SIMULATION AND EXPERIMENTAL VERIFICATION OF METALLO-THERMO-MECHANICAL BEHAVIOR IN STIRRING QUENCHING PROCESS, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  57. P. Danev, R. Radeva: THE COOLING ABILITY OF VACUUM OILS, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  58. D. S. MacKenzie, J. W. Newkirk: THE USE OF THE JOMINY END QUENCH FOR DETERMINING OPTIMAL QUENCHING PARAMETERS IN ALUMINUM, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering , IFHTSE 2001, Dubrovnik- Cavtat, Croatia, 12 – 14 September 2001.
  59. W. Gęstwa, M. Przyłęcka: THE MODIFICATION OF SODIUM POLYACRYLATE WATER SOLUTION COOLING PROPERTIES BY Al2O3, Hindawi Publishing Corporation, Advances in Materials Science and Engineering, Volume 2010, Article ID 949853, 5 pages, doi:10.1155/2010/949853.